- Download the latest drivers, firmware, and software for your HP EliteDesk 800 G3 Small Form Factor PC.This is HP’s official website that will help automatically detect and download the correct drivers free of cost for your HP Computing and Printing products for Windows and Mac operating system.
- Usb2 0 Pc Camera Driver free download - Kindle for PC, USB PC Camera (SN9C102), TV 3L PC, and many more programs.
- In the same directory to which the USBDRVEN.EXE file was downloaded, double-click to open the Sonyusb folder that was created. In the Sonyusb folder, double-click the Setup.exe file. At the Welcome to the InstallShield Wizard for Sony USB Driver screen, click the Next button. At the Information screen, click the Next button.
The USB video device class (also USB video class or UVC) is a USBdevice class that describes devices capable of streaming video like webcams, digital camcorders, transcoders, analog video converters and still-image cameras.
This USB 3.0 to VGA video adapter works as an external video card, enabling the USB port on your computer to output video to a VGA display at 1920 x 1200 resolution. The adapter also features on-board driver installation, which means the adapter will work when you connect it, even without a software disc or Internet connection.
The latest revision of the USB video class specification carries the version number 1.5 and was defined by the USB Implementers Forum in a set of documents describing both the basic protocol and the different payload formats.[1]
Devices[edit]
Webcams[edit]
Webcams were among the first devices to support the UVC standard and are currently the most popular UVC devices.[citation needed]
TV receivers and video recorders[edit]
UVC v1.5 supports transmission of compressed video streams, including MPEG-2 TS, H.264, MPEG-4 SLSMPTE VC1 and MJPEG.[1]
Formats[edit]
- Uncompressed YUV formats YUY2, NV12[1]
- DV formats SD-DV, SDL-DV, and HD-DV (525-60, 625-50, 1125–60, 1250-50)[1]
- Frame-based[1]
- Video stream formats like MPEG-2 TS, H.264, MPEG-4 SL, SMPTE VC1, VP8 and MJPEG[1]
Revision history[edit]
For detailed history on releases, see the revision history section of the published USB UVC documents, available from the USB.org page.
| Version | Date | Description |
|---|---|---|
| 1.0 | September 4, 2003 | Initial release |
| 1.0a | December 4, 2003 | Add Additional Descriptor Subtypes for 'Extension' types. FAQ: Added section 2.21 Interlaced Video |
| 1.0b | ? | Changes to FAQ only: Protocol STALL behavior, Current and Future Payload Header Formats |
| 1.0c | June 5, 2004 | Changes to FAQ only: Added Motion JPEG Characteristics |
| 1.1 | June 1, 2005 | Major update including among other things: New Documents specifying for Stream and Frame Based Payloads, Latency optimizations for Stream-based formats, Specification of Absolute and Relative Control relationship, Asynchronous controls behavior, change naming from 'VDC' to 'UVC', obsolete old formats and add new ones, add a flag to distinguish between dynamic and fixed frame rate devices (RR0043). |
| 1.5 | June 6, 2012 | Added H.264 and VP8 payloads, and accompanying controls for video encoders. Included references to USB 3.0 |
Operating system support[edit]
- Android
- As of the release of Android 10 (and still as of June 2020) Android does not support UVC [2](USB video devices). Earlier Android versions do support UVC.
- Linux
- USB video class support for Linux is provided by the Linux UVC driver, although as of July 2017 support for still-image capture is not yet implemented.[3] The UVC driver has been included in the Linux kernel source code since kernel version 2.6.26. Detection of UVC 1.5 devices was introduced in Linux kernel version 4.5,[4] but support in the driver for UVC 1.5 specific features or specific UVC 1.5 devices was not added and MPEG-2 TS, H.264 and VP8 payloads are not supported yet. The result is that some UVC 1.5 devices that also support UVC 1.1 work correctly.
- OS X
- OS X ships with a UVC driver included since version 10.4.3,[5] updated in 10.4.9 to work with iChat.[6]
- Windows
- Windows XP has a class driver for USB video class 1.0 devices since Service Pack 2, as does Windows Vista and Windows CE 6.0. A post-service pack 2 update that adds more capabilities is also available.[7] Windows 7 added UVC 1.1 support. Support for UVC 1.5 is currently only available in Windows 8 and 10.[8][9][10][11] Most device manufacturers do, however, provide their own drivers tailored to the capabilities of the product in question.[citation needed]:
| UVC Version | Windows Vista/XP | Windows 7 | Windows 8 |
|---|---|---|---|
| USB Video Class 1.5 (H.264 video codec) | Not supported | Not supported | Supported |
| USB Video Class 1.1 | Not supported | Supported | Supported |
| USB Video Class 1.0 | Supported | Supported | Supported |
- FreeBSD
- FreeBSD added the uvc driver for UVC devices in Jan 18, 2011; added in the 9.0 release.[12]
- NetBSD
- NetBSD added the uvideo driver for UVC devices in September 2008; added in the 5.0 release.[13]
- OpenBSD
- OpenBSD added the uvideo driver for UVC devices in April 2008; it appears in the 4.4 release.[14]
- PlayStation 3
- The PlayStation 3 added support for UVC compatible webcams in firmware version 1.54 (only works for video chat, not games.)
- MenuetOS
- MenuetOS added support for UVC compatible webcams in version 0.87
- Solaris
- Solaris includes support for UVC webcams in the form of the usbvc driver for OpenSolaris. The driver ships with Solaris Express build 56 and later.[15]
References[edit]
- ^ abcdefUSB Device Class Definition for Video Devices, Revision 1.5, June 2012.
- ^'Android 10 no UVC issue'.
- ^'Linux UVC driver & tools'. www.ideasonboard.org.
- ^'Enable UVC 1.5 device detection'.
- ^Mac OS X 10.4.3 update 'comes with native support for UVC devices', NCH Software. Retrieved June 29, 2019.
- ^Mac OS X 10.4.9 update 'Includes iChat support for USB Video Class webcams', Apple Inc. April 8, 2008. Retrieved January 28, 2010.
- ^The updated USB Video Class (UVC) driver for Windows XP with Service Pack 2 is available.
- ^USB Video Class Driver Overview. Microsoft. Retrieved July 22, 2014.
- ^barrygolden. 'USB Video Class Driver Overview - Windows drivers'. docs.microsoft.com. Retrieved 2020-05-26.
- ^barrygolden. 'Windows 10 UVC camera implementation guide - Windows drivers'. docs.microsoft.com. Retrieved 2020-05-26.
- ^barrygolden. 'Microsoft extensions to USB Video Class 1.5 specification - Windows drivers'. docs.microsoft.com. Retrieved 2020-05-26.
- ^'UVC(4) FreeBSD Kernel Interfaces Manual'. 2012-08-06. Archived from the original on 2013-09-11. Retrieved 2013-09-10.
- ^'uvideo - NetBSD Manual Pages'. netbsd.gw.com.
- ^'uvideo(4) - OpenBSD manual pages'. man.openbsd.org.
- ^'USB Video Class driver on Solaris'. Archived from the original on 2007-08-23. Retrieved 2007-08-23.
Note: If you have run HCWCLEAR, you must reboot your PC and leave the USB-Live2 installed. After a reboot you will see the Found New Hardware Wizard installation message, hit Cancel. then continue below.
Hauppauge Capture
Hauppauge Capture version 38344
Date: Dec. 9, 2020 | Size: 81 MB
Release notes | Backup download site | Previous version 37227
To install
- Plug your Hauppauge product into your PC or power cycle your Hauppauge product ( if this is an upgrade to an existing version of Hauppauge Capture)
- Click the download button above and 'Save' Hauppauge Capture to your PC (do not select 'Run')
- Once Hauppauge Capture is downloaded, run the Hauppauge Capture installation from your 'Download' folder
- If you see the message 'Windows Protected Your PC, Windows Smartscreen prevented an unrecognized app ...', click 'More info' and 'Run anyway'. Windows Smartscreen is a new 'feature' in Windows 10 to prevent new updates from being installed automatically.
- After installation, you will be asked to reboot your PC. Please reboot.
- While rebooting your PC, if you have an HD PVR 2 or HD PVR Pro 60, power cycle by removing the power plug or USB cable from the back of the device for a few seconds and then plug it back in. This resets the device.
- Once your PC is rebooted, you will see the Hauppauge Capture icon on your Windows desktop. Run it.
Hauppauge Capture supports the following products:
- HD PVR Pro 60
- HD PVR 2 (all models)
- Colossus 2 and Colossus
- HD PVR Rocket
- USB-Live2
- ImpactVCBe and ImpactVCB
- HD PVR 60
- HD PVR model 1212
- Note: if you have the Colossus 2, HD PVR 2 model 1512 or the HD PVR 2 GE+, if you have 5.1 channel AC3 audio from HDMI or optical audio, your recordings will have 5.1 channel AC-3 audio
Comments, questions on this version? Please e-mail us at: techsupport@hauppauge.com
New product installs:
If you have recently purchased a new WinTV product and your WinTV v8.5 Activation Code has never been used, you can install WinTV v10 with this code. This only applies to unused WinTV v8.5 Activation Codes.
Installation notes for WinTV v8.5:
If you have one of the following products: a Hauppauge WinTV-HVR-850, WinTV-HVR-950, the original Colossus or HD PVR model 1212, you must use WinTV v8 or WinTV v10. WinTV v8.5 does not support these products.
A WinTV v8.5 Activation Code will be needed to install this WinTV v8.5 version. If you do not have an Activation Code, but you have a WinTV v7 CD, you can install the WinTV v8 application.
If you do not have an Activation Code: If you do not have a WinTV v8/8.5 Activation Code, you can purchase the new WinTV v10 Activation Code on the Hauppauge webstore for $12.95. This can be used with WinTV-HVR, WinTV-dual and WinTV-quad products, as well as the HD PVR series of HD recorders plus USB-Live2 and the ImpactVCBe.
Extend: If you have an Activation Code for WinTV v8 or v8.5 with Extend, the latest version of WinTV v8.5 with Extend will automatically be installed.
Installation on multiple computers: the WinTV application can be installed on as many PCs as needed as long as you use the same Hauppauge device. We link the serial number of your TV tuner (sometimes it's the MAC address) with the Activation code. So as long as you use the same Hauppauge device, you can install on more than one computer.
WinTV v8.5 application and Windows driver package
This download is a complete WinTV v8.5 application, including Windows drivers for supported WinTV products plus utilities.
WinTV v8.5 Installer
For Windows 10, 8, and 7
Version: 37352 | File size: 103 MB | Date: Dec. 25, 2019
Release notes | Backup download site | Previous version
To install the WinTV v8.5 application
- Step 1: Download the WinTV v8.5 installer by clicking the download button above. The WinTV v8.5 Installer is normally saved in the Download folder on your PC
- Step 2: Run wintv85setup from the Download folder on your PC. Halfway through the installation, a message will pop up asking for you to enter the Activation Code.
- Step 3: At the Activation required screen, click on Enter Activation code and enter the activation code which was emailed to you, is printed on the WinTV v8 activation card or printed on your WinTV v8 CD. You do not need to enter the dashes, and you can use upper or lower case characters.
- Step 4: When the installation is complete, you will find the WinTV icon on your Windows desktop. Double click on this icon and the WinTV application will run. On the first run of WinTV, it will automatically go through the TV source selection and will scan for channels.
To install the latest driver:
Leave your USB-Live2 plugged into your PC. Follow the following steps:
- Download the Driver10 update
- Run the EXE file.
- This will install the USB-Live2 base driver. At the completion of the driver install you should see a message which says Drivers have been updated successfully.
Third Party Applications
Stream your live video, video + screen, or screen-only along with your audio to viewers via the public Internet.
Which application should I use, Hauppauge Capture or WinTV?
Most people will find Hauppauge Capture easier to use for recording from home video tapes. With Hauppauge Capture, you can quickly record and playback your video recordings.
WinTV is good if you need to have scheduled recording. Like all WinTV scheduled recordings, you can set a time to start and a length of the recording. WinTV is also better to use if you simply want to watch live video. WinTV has the ability to have a small video window 'always on top' of your Windows screen. In addition, for industrial uses, there is the WinTV SDK which would allow you to write a custom Windows application using live video coming from the USB-Live2.
Hauppauge Capture can only have video in the Hauppauge Capture screen or full screen and there is no 'always on top' mode. Because of this, Hauppauge Capture is not as suitable for video monitoring as WinTV is.
Which should I use, S-Video or composite video?
S-Video has twice the video 'bandwidth' as does composite video (the yellow RCA connector commonly found on the back of VCR's, cable TV boxes and video cameras). Therefore, for best video quality, use S-Video if available.
The only problem with S-Video is that many video sources, such as cable TV boxes, have composite video but not S-Video.
Can I capture video with Adobe Flash Media Encoder Live?
Yes. Please see the following pictures to set the input source on the USB-Live2. Also, the audio needs to be routed from your microphone or other audio source to the 'Line in' jack on your PC.
Currently, while you can bring video from USB-Live-2 into the Media Live Encoder, audio from USB-Live-2 is not supported.
This is the Adobe Flash Live Media Encoder main menu
Periferica Video Usb Adapter
Click the 'wrench' icon next to the Hauppauge device.
Then click the tab marked 'CrossbarPeriferica Video Usb Otg
' and click 'Input'. You will see a list of video input sources which USB-Live-2 has. Set the input source to the one you want to use.How to setup USB-Live2 in WinTV v10
Click to play video
Hauppauge Capture and USB-Live2
Click to play video
USB-Live2 with OBS for streaming and recording
Click to play video
Prodinfo: get information on your Hauppauge TV tuner
Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe
HCWClear: remove the Hauppauge driver and applications from your PC
HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the WinTV program.